Choosing the right Signal Booster

It’s the year 2020 and well into the 21st century. You’d think bad cell reception could be a thing of the past by now, right? Not quite.

Poor cell reception is still very much a thing and is common wherever you may be around the country. If this has happened to you, I’m sure you’re no stranger to dropped calls or very poor call quality. But did you know there’s an easy fix that can solve your signal problems? The answer lies in cellphone signal boosters. Our Cell phone signal booster does a fairly good job of finding the best one for you! If you need help in choosing the right signal booster, contact us today!

What Causes a Weak Signal?

There are two main culprits that can cause weak signals and poor reception. The first one is the amount of distance between you and the tower that broadcasts the signal. The further you are from the tower, the weaker your reception gets.

For the second one, towers aren’t the issue, especially in the cases of cities where signals are always strong. When that happens, construction materials may be blocking your path, such as an ongoing building construction, newly-installed windows, or perhaps the concrete used can also block signals.

In some cases, the obstruction can be easily replaced or removed to get rid of the signal problem. However, that isn’t an option, especially when the cause is a permanent fixture. In such cases, the best thing to do is to use a cellphone signal booster.


Considerations to Make When Choosing a Signal Booster


The type of connection you need will mostly depend on your carrier. Each phone carrier broadcasts a specific type of signal over a specific radio frequency. Meanwhile, most signal boosters will only amplify a certain type of signal, whether it’s 2G, 3G, or 4G LTE. Before selecting a specific type of booster, consider checking the type of signal used by your network and your device’s capabilities to make sure you get one that’s compatible with your devices.

cell network
map location


Your location is a strong determining factor for the type of signal that you get. This will depend on whether you receive a strong external signal or not. For instance, urban and suburban areas typically get strong external signals while those in rural areas are generally weak.

In cases where the external signal is strong, you might benefit from an omnidirectional antenna. It receives external signals and amplifies them internally so you can reach areas inside the location that was previously unreachable. For those with weaker external signals, a yagi directional antenna is the best choice for you. When pointed at the nearest cell tower, it can pick up weak, long-range signals and amplifies them to improve your connection.


How big is your home or office?

Does the entire structure suffer from weak signals or is there a specific location you want to reach?

Locations such as basements and middle rooms inside crowded urban centers suffer from weak signals, while numerous other structures block the signals outright.

Home signal boosters are often used to boost signals for an entire room, or even the entire structure as they can reach a max gain of about 72 dB and a range of 6,000 square feet.

network cables


Signal strength often suffers due to a lengthy cable, which can decrease by up to 3.9 dB for every 100 feet of cable. Moreover, every 3 dB change in the signal could correspond to an exponential drop in signal strength. That is why it is important to consider all the various factors to determine the optimal cable length for a new installation

Where do you need to boost signal?